2010 IES Automatic Structural Steel Beam Welding Line
(2) 135-Ton Metal Muncher Hydraulic Iron Workers
90-Ton Piranha Hydraulic Iron Worker
50-Ton Piranha Hydraulic Iron Worker
Cincinnati 3/8" x 12' Plate Shear
American Steel Line Decoiler
Airam Air Shear
Roller Die Shuttle Table, 40" Shear Die
Wysong 18 Gauge X 14' Pneumatic Shear
(5) Bradbury Tooling Rafts
Good Selection of Tooling Including: Punches, Dies, Die Sets, Brake Tooling, Shear Blades, Roller Conveyor, Replacement & Spare Parts, Large Assortment of Mig Welding Machines, Paint Equipment, Fork Lifts, Ford F-350 Super Duty XL Trucks, Float Trailers, Shop Support Equipment, Steel Building Materials, and Office Equipment
Major Metal Building Manufacturer
2010 IES Automatic Structural Steel Beam Welding Line, 6” to 72” Beam Width, 5” to 18” Flange Size, 1 ¼” Flange Thickness, ½” Web Capacity, 4:12 Maximum Pitch Capacity, Dynapar Speed Controller and Omron High Resolution (1000 Count) Encoder & Continental Proportional Card. Automatic Beam Welding Station includes, (2) Lincoln Idealarc DC-1000 Welding Power Supplies, (S/N’s S-U1990321542 & S-U1990321541), (2) Lincoln NA-5 Weld Controllers, (2) Lincoln Dual Wire Submerged Arc Wire Feeders, (2) 1 ¾ HP Invincible Flux Recovery Units, 30 HP Hydraulic System & Controls. Automatic 72” Seam Welding Station includes, Lincoln Idealarc DC-1000 Welding Power Supply, S/N S-U1990321543, Lincoln NA-5 Weld Controller, Lincoln TC-3 Weld/Traverse Drive & Submerged Arc Wire Feeder, Weld Engineering Pneumatic Flux Recovery System, M# Super FH-100-A/P, S/N 116514W, 72” X 1 ¼” Hydraulic Tacking Station includes, 7 ½ HP Hydraulic Supply & Control System, 180' x 79” x 250 pound per foot Hydraulic Driven In/Out Feed Conveyor, Late Model, Very Well Maintained Machine
(2) 135 Ton Metal Muncher Hydraulic Iron Workers, M# MM-135A-18, S/N 073830799 & M# MM-135-18, S/N 07260996, 1-11/16” Diameter thru 1” Thickness Punch, 1” x 7” thru ¼” x 24” Flat Bar Shear, 4” x 4” x 3/8” Angle Shear, 3” x 3” x 3/8” Coper/Notcher, Large Selection of Tooling, including, 4’ Brake Attachment, Punches & Dies
90 Ton Piranha Hydraulic Iron Worker, M# P90, S/N P4-172, 1 1/8” Diameter thru 1” Thickness Punch, ½” x 20” Plate Shear, 6” x 6” x 5/8” Angle Shear, 4” x 6” x 3/8” Coper/Notcher
50 Ton Piranha Hydraulic Iron Worker, M# P50, S/N 3747, 13/16” Diameter thru ¾” Thickness Punch, 5/8” x 15” Plate Shear, 5” x 5” x 3/8” Angle Shear, 1 ½” Round Shear, 1” Square Shear
Cincinnati 3/8" x 12' Plate Shear, M# 2512, S/N 21701
American Steel Line Decoiler, M# 1000, S/N 9321 12/95, 42" x 12"/28" ID
Bradbury Roll Forming Mill, 12 Stand, 3 1/2" Shafts, 17" Spacing, 57" Between Housings, Manual Material Guide, Chain Drive, 15 HP
Airam Air Shear, W/ 48" Shear Die
Roller Die Shuttle Table, 43" X 64"
40" Shear Die
Roll Forming Mill, 7 Stand, 1 3/4" Shafts, 14" Between Housings, Chain Drive, 20 HP
Wysong 18 Gauge X 14' Pneumatic Shear, Manual 24" Back Gauge, M# A-165, S/N PA11-105
Bradbury Roll Forming Mill Base, M# MCE22-48-16, S/N 6617, 16 Stand, 60 HP, 5' X 24'
Bradbury 16 Stand Gear Drive Unit
(3) Bradbury Tooling Rafts, (1) 6 Stand, (1) 7 Stand, (1) 2 Stand, 3 1/2" Shafts, 50" Between Housings, 18" Space w/ Bradbury 36" Standing Seam Tooling
(2) Bradbury Tooling Rafts, 6 Stand, 3 1/2" Shafts, 46" Between Housings, 18" Space
***Good Selection of Tooling Including: Punches, Dies, Die Sets, Brake Tooling, Shear Blades, Roller Conveyor, Replacement & Spare Parts***
Welding
|
Miller Gasoline Powered Portable Welder, M# Bobcat 225 G Plus, S/N KF785364 |
|
Miller Portable Mig Wire Feeder, M# Suitcase 8VS, S/N S-LC262883 |
|
Miller Mig Welding Machine, M# CP-302, S/N KK200085, W/ 24A Wire Feeder, S/N LG400449W |
|
Miller Mig Welding Machine, M# CP-302, S/N KK087863, W/ 60 Series Wire Feeder, S/N LB082227 |
|
Miller Mig Welding Machine, M# CP-302, S/N KH445109, W/ 22A Wire Feeder, S/N KK215012 |
|
Miller Mig Welding Machine, M# CP-302, S/N LA159319, W/ S-22A Wire Feeder, S/N KG105638 |
|
Miller Mig Welding Machine, M# Regency 250, S/N KF766661, W/ S-22A Wire Feeder, S/N KG138694 |
|
Miller Mig Welding Machine, M# Regency 250, S/N KH544561, W/ 70 Series Wire Feeder, S/N LC410996 |
|
Miller Mig Welding Machine, M# Deltaweld 451, S/N KB003211, W/ 60 Series Wire Feeder, S/N LA166384 |
|
Miller Mig Welding Machine, M# CP-300, S/N KA898851, W/ 22A Wire Feeder, S/N KK2-7000 |
|
Miller Mig Welding Machine, M# Deltaweld 300, S/N KF764912, W/ 60 Series Wire Feeder, S/N LA171065 |
Hypertherm Plasma Cutting System, M# Powermax 1650, G3 Series, S/N 1650-018368
Oxy/Acy Torch Carts
Victor Torch Tractor, M# VCM200, S/N 0001869
Welding Tables, Mig Wire, Screens, Remote Feeder Jibs, Jigs, Roller Stands & Saw Horses
Paint Equipment
Weather Rite Heated Air Make-Up Unit, M# TOT 224 HHL Outdoor, 40,000 CFM, 3,888,000 BTU, Natural Gas, W/ 4 Way Discharge Head
(2) Spray Tech Systems Paint Room Filtration Systems, W/ 7' X 20' Dry Filter Chamber, 34" x 5 HP Duct Fan, Duct Work & Roof Flange, (Cleaned and Disassembled, ready to load)
Graco Pneumatic Paint Pumps
Paint Room Support Carts
Material Handling
Nissan 8,000# Fork Lift, M# P7-UF03A35, S/N 000935, Triple Mast, Side Shift, L.P., 6’ Forks
Tailift 3,600# Forklift, M# FG18, S/N 308410B, Side Shift, L.P.
Cantilever & Stand Up Material Racks
Magnetic Sheet Lifters, Horizontal & Vertical Plate Lifting Clamps, I-Beam Lifting Tongs, Lifting Bridles, Spreader Beam, Chains & Hooks
Rolling Stock
|
2004 Ford F-350 Super Duty XL Truck, VIN 1FDWF36P34ED69437 |
|
2000 Ford F-350 Super Duty XL Truck, VIN 1FDWF36F5YEA96840 |
|
1998 Freightliner Tractor, M# FLD120, VIN 1FUYDSEB5WL908926 |
|
Fruehauf 48' Spread Axle, Air Ride Float Trailer |
|
Phoenix 45' Slide Axle Float Trailer |
|
Utility 45' Spread Axle, Air ride Float Trailer |
|
Fontaine 42' Slide Axle Float Trailer |
|
Trailmobile 42' Slide Axle Float Trailer |
Club Car Golf Cart, M# 475225, S/N A9547
(2) Merritt Aluminum Truck Headache Racks
Shop Support
Hougen, Evolution & Black & Decker Magnetic Drills, Unibor Annular Cutters, Morse 9” Metal Devil Saw, Porter Cable Impact Gun, Dewalt Right Angle & Straight Electric Grinders, Central Hydraulics 10 Ton Floor Jack, Bottle Jacks, Bessey Type Clamps, Work Benches, Storage Cabinets, Bag Sealers, Shipping Scales, Burning Tables, Measuring Tools, Ladders, Air Compressors, Bolt Bins, Vises, Stair Units, Pedestal Fans, Dollies
Steel Building Materials
Metal Doors, Door Frames, Windows, Hardware, Standing Seam Roofing, Closures, Closure Foams, Mastics, Sealants, Fasteners, Flanges, Hardware, Wireline Rope & Reels, Turn Buckles & Bundlers
Office Equipment
Copy Machines, Computers, Printers, Faxes, Office Supplies, Desks, Chairs, Drawing Tables, Drafting Equipment, Lockers, Tables, Ice Machines
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
All Internet bidders must provide a WIRE TRANSFER DEPOSIT of approximately 25% of your planned spending amount or a $2,500 Minimum Deposit in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
| ONSITE BIDDERS |
|
Registration is available onsite. ***All onsite bidders must provide a $500 cash minimum registration deposit or 25% of approximate bid amount (whichever is greater) via wire transfer, cashier's check or company check accompanied by a bank letter of guarantee valid for 30 days prior to the auction.*** PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
|
All internet bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
ONSITE: 15%
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
