CNC VERTICAL MACHINING CENTERS
(3) (2001/2004/2005) OKUMA MDL. MC-V4020 VERTICAL MACHINING CENTERS, CAT 40-taper spindle, 32-position automatic tool changer, 15,000 RPM, Turbo "MicroFine" elevated chip conveyor, oil cooler, OSP V-100M CNC control
(2001) OKUMA MDL. MC-V4020 VERTICAL MACHINING CENTER, TCAT 40-taper spindle, oil cooler, 8,000 RPM, 20 position automatic tool changer, OSP V-100M CNC control
(2003) OKUMA MDL. MB-46VBE "ACE CENTER" VERTICAL MACHINING CENTER, CAT 50-taper spindle, 32 position automatic tool changer, complete w/ coolant thru spindle, high pressure coolant, oil cooler, 6,000 RPM, OSP-E 100M CNC control
(3) (1997) OKUMA MDL. MX-45VAE VERTICAL MACHINING CENTERS, NT 40-taper spindle, 20 position automatic tool changer, oil cooler, 7,000 RPM, OSPV700M CNC control
MATSUURA MDL. MC1000VS VERTICAL MACHINING CENTER w/ Yasnac control, 25 position automatic tool changer, BT 40 taper, 4th axis machine, 47" x 20" slotted table, Dakin oil cooler, hydraulics, Keller filtration system, Matsuura Yasnac CNC Controls
(1997) MATSUURA MDL. MC1000VG VERTICAL MACHINING CENTER, 21" x 45" table, 4th axis machine, 30 POS ATC, BT 45 taper, high pressure coolant, Yasnac CNC control
(2) (1997) MITSUI SEIKI MDL. VT3A CNC VERTICAL MACHINING CENTERS, 22-3/4" x 43" table size, 20,000 RPM, 40-position automatic tool changer, Fanuc Series 16-M controls,
(2) MATSUURA MDL. MC-1000V5 CNC VERTICAL MACHINING CENTERS, 20" x 55" table size, travels: X=41", Y=20", Z=22", 50-taper, 20-3580 RPM spindle speeds, Fanuc 6M controls
CNC HORIZONTAL MACHINING CENTERS
(2000) OKUMA MDL. MX-40HA HORIZONTAL MACHINING CENTER, Travels: X=22.05", Y=24.02", Z=22.05", (2) 15.75" x 15.75" pallets, 1° indexing table, 2-pallet changer, BT 40 taper spindle, 7,000 RPM, coolant thru spindle, 30 position automatic tool changer, oil cooler, 7,000 RPM, Hennig elevated chip conveyor, OSP 7000M CNC control
(1996) MITSUBISHI MDL. M-H80D CNC HORIZONTAL MACHINING CENTER, Travels: X=48.15", Y= 39.250", (2) 30" square pallets, w/ 1/2° indexing, 46" clearance table to guard, Cat 50 taper spindle, 60-position automatic tool changer, transformer, 4-axis machine, Dakin oil cooler, hydraulics, coolant thru spindle, Mitsubishi CNC control
(1980) YASDA MDL. YBM-70W HORIZONTAL MACHINING CENTER, 30-position automatic tool changer, Fanuc 7M control, cat-50 taper spindle
(1984) BENDIX-TOYODA MDL. FHN50 II CNC HORIZONTAL MACHINING CENTER, w/ 4th axis, 28" x-axis, 20" pallets
YAM MDL. HSMC-650 HORIZONTAL MACHINING CENTER, 40-position tool changer, Cat 50 taper, 25" pallets, 40" pallet to door opening, dual pallet machine, Fanuc 6M CNC control
MAKINO HORIZONTAL MACHINING CENTER, w/ 18" x 18" built in rotary table, 30-position automatic tool changer, Cat 50 taper spindle, Fanuc 7M CNC controls
MAKINO HORIZONTAL MACHINING CENTER, w/ 18" x 18" rotary table, Fanuc 3000C CNC controls, 30-position automatic tool changer, Cat 50 taper spindle
(3) (1985/1985/1986) OKAMOTO MDL. HMC3000 CNC HORIZONTAL MACHINING CENTERS, 42" x 118" table size, travels: x-120" (table), y-60" (vertical), z-30" (column), 20-4000 RPM spindle speeds, 40-position automatic tool changer, Fanuc 11M CNC controls, 50-taper
(1984) OKAMOTO MDL. HMC3000 CNC HORIZONTAL MACHINING CENTER, 34" x 118" table size, travels: x-120" (table), y-60" (vertical), z-30" (column), 20-4000 RPM spindle speeds, 40-position automatic tool changer, Fanuc 6T CNC controls, 50-taper
MAKINO MDL. MC100 CNC HORIZONTAL MACHINING CENTER, (6) 30" x 30" pallets w/ pallet changer, approximately 50-position automatic tool changer, Fanuc 6M CNC control
CNC TURNING CENTERS
(1998) OKUMA MDL. 762S CROWN CNC TURNING CENTER, 21.65" swing over bed, 15.75" swing over cross slide, 10.62" turning dia., Z=20.47", X=7.28", 12 station turret, 10" 3-jaw chuck, hydraulic tailstock, OSP 7000L CNC control
(1998) OKUMA MDL. 762S "BIG BORE" CROWN CNC TURNING CENTER, 21.65" swing over bed, 15.75" swing over cross slide, 10.62" turning dia., Z=20.47", X=7.28" 3.15" spindle bore, 12 station turret, 10" 3-jaw chuck, hydraulic tailstock, OSP 700L control
OKUMA MDL. LC30-2ST 4-AXIS "SIMULTURN" CNC LATHE, w/ 12" diameter 3-jaw chuck, dual turrets, Okuma OSP5000L CNC controls
COORDINATE MEASURING MACHINE
(1997) BROWN & SHARPE EXCEL 0-15-9 COORDINATE MEASURING MACHINE w/ 86.5"L x 64"W x 94"H physical dimensions, PH10MQ probe, computer controlled, HP printer w/joystick control, PC2000 DMIS software DCC Version 3
CNC VERTICAL BORING MILL
(1982) O-M MDL. TM2-10N CNC VERTICAL BORING MILL, 6T Fanuc control, 39" table
VERTICAL BORING MILL
(1979) 49" TOSHIBA SHIBAURA MDL. TX-13 VERTICAL BORING MILL, 49" table, 5-station ram turret head, 30 HP spindle drive<
HORIZONTAL BORING MILL
UNIVERSAL HORIZONTAL BORING MILL, 3" spindle, 27" x 58" table, rotary type table
VERTICAL TURRET LATHES
56" BULLARD VERTICAL TURRET LATHE, w/ 70" max swing, (2) ram heads, side head, 32" cross travel each ram head, pendant controls, 3-axis digital readout,
42" BULLARD "CUTMASTER" VERTICAL TURRET LATHE, 4-jaw chuck, 30 HP, 480 volt, 5-station turret, side head, 2-axis digital readout
(3) 34" BULLARD "SPIRAL DRIVE" VERTICAL TURRET LATHE
LATHES (All Types)
LEBLOND MDL. 4025 HEAVY DUTY SLIDING BED LATHE, w/ 40" swing, approx. 65" thru gap, , 5-600 RPM spindle speeds, 3" hole thru spindle, 24" dia. 4-jaw chuck
18" X 60" AMERICAN LATHE, 32-1400 RPM Spindle speeds, 3-jaw chuck
(2) HARDINGE MDL. HC CHUCKER LATHE
OKUMA MDL. LS MANUAL GEARED HEAD TOOLROOM LATHE, w/ Heidenhain digital readout system, 21" x 80" 2" spindle bore, coolant
(3) OKUMA MDL. LS 21"X 60" GEARED HEAD TOOLROOM LATHES complete w/, In threading, thread dial, 12" 3-jaw chuck, 2" spindle bore, Pathfinder 2-axis digital readout, 35-1800 RPM
MONARCH MDL. 25N 31" X 72" GEARED HEAD LATHE, 6-303 RPM, in threading, micrometer stop, threading dial, 24" dia. 3-jaw chuck
LEBLOND "REGAL" TOOLROOM LATHE, 1-1/2" spindle bore, in/mm threading, threading dial
MILLS (All Types)
BRIDGEPORT SERIES II VERTICAL KNEE MILL, w/ dual 2-HP heads, 13-1/2" x 40, power feed slotted table, Dynapath Autocon Delta CNC controls
BRIDGEPORT SERIES II VERTICAL KNEE MILL, 60-4200 RPM, 9" x 42" slotted table
(7) BRIDGEPORT "SERIES J" VERTICAL KNEE MILLS w/, 9" x 42" table, some including 1.5-HP
ALLIANT VERTICAL KNEE MILL, 9" x 42" table, J-Head, 1.5 HP vari, Anilam Mini Wizard 2-axis digital readout
DOALL VERTICAL KNEE MILL, 9" x 42" table
CINCINNATI NO. 3 HORIZONTAL MILLING MACHINE, w/ 15-1/4"x 62-1/2" slotted table
CINCINNATI NO. 2L HORIZONTAL MILLING MACHINE, 10" x 53" slotted table
SAWS (All Types)
DO-ALL MDL. C12 HORIZONTAL BANDSAW
(1963) DO-ALL MDL. V36, 36" VERTICAL BANDSAW, w/ 30-1/2"x 30-1/2" tilting table,
EDM
ELOX SINKER TYPE EDM, complete w/ Anilam Mini Wizard 2-axis digital readout
NC DRILLS
PRATT & WHITNEY TAPE-O MATIC NC TAPE DRILL, 30" x 20" table w/ D & D electronics Siemens control panel
PRATT & WHITNEY TAPE-O MATIC NC TAPE DRILL, 45" x 29" table w/ Decitek retrofit behind the tape NC control
PRATT & WHITNEY TAPE-O MATIC NC TAPE DRILL, 45" x 29-1/2" table w/ Decitek retrofit behind the tape NC control
PRATT & WHITNEY TAPE-O MATIC TRIAX 2640 NC DRILL
PRATT & WHITNEY MDL. "C" TAPE-O MATIC NC VERTICAL DRILL w/ 29" x 45" slotted table
PRATT & WHITNEY TAPE-O MATIC NC TAPE DRILL, 53" x 32" table w/ Decitek retrofit behind the tape NC control (not running)
INSPECTION
INCLUDING: Micrometers, Pin Gauge Sets, Vernier Calipers, Calipers, Gage Blocks, Thread Gauges, Deltronic Gauges, Etc.
MATERIAL
STEEL STOCK, CONSISTING OF: Aluminum Bar, Flats, Tube, Round Stock, Copper and Brass Rounds
MILLING MACHINE
FRITZ WERNER MDL. FV3 VERTICAL MILLING MACHINE, w/ 14" x 82" table size, 35.5-1800 RPM spindle speeds
BRIDGEPORT 1J VERTICAL MILLING MACHINE, w/ 9" x 36" table size, 80-2720 RPM spindle speeds
CINCINNATI HYDROMATIC MDL. 3-24 PRODUCTION MILL, w/ 12" x 50" table size
FORKLIFT TRUCKS
DATSUN MDL. CPF02 5300# PROPANE FORKLIFT TRUCK, w/ side shifter, solid tires
CLARK MDL. GPS25 4650# PROPANE FORKLIFT TRUCK, w/ side shifter, solid tires
MISCELLANEOUS MACHINERY
30" SCHERR-TUMICO OPTICAL COMPARATOR
2-DOOR GAS FIRED OVEN, w/ Partlow chart recorder, meters & controls
KOCH ROMI-KON 300 OILY WASTE REDUCTION MACHINE
8" X 24" ABRASIVE NO. M3 HAND FEED SURFACE GRINDER, w/ 8" x 24" magnetic chuck
JOHNSON MDL. J HORIZONTAL BANDSAW
FLEX ARM RIVETING UNIT
ASSORTED DRILL PRESSES
HYDRAULIC ARBOR PRESS, w/ 42" between uprights
60" X 60" ACORN WELDING TABLE
8' X 16' X 14" THICK GRANITE SURFACE PLATE
20" TSUDAKOMA 4TH AXIS ROTARY TABLE
12" TSUDAKOMA 4TH AXIS ROTARY TABLE
24" ROTARY TABLE
25 TON MDL. B H-FRAME SHOP PRESS, 45" between uprights, hydraulic pump
ELECTRO ARC TAP DISINTEGRATOR
HYSTER 3-WHEEL LPG FORKLIFT TRUCK, hydraulic carriage, 2-stage mast, solid tires
TORIT MDL. 84 BAG TYPE DUST COLLECTOR
GREENARD NO. 4 ARBOR PRESS
MORE THAN 1000 #40 & #50 TAPER TOOL HOLDERS
& MUCH MORE....
OVER 1800 LOTS INCLUDING: MORE THAN 30 CNC MACHINES, VTL’s, TOOLROOM AND MUCH MORE!
CNC VERTICAL MACHINING CENTERS
(3) (2001/2004/2005) OKUMA MDL. MC-V4020 VERTICAL MACHINING CENTERS, Travels: X=40", Y=20", Z=17.72", 20" x 48" table, 1500# table load capacity, CAT 40-taper spindle, 32-position automatic tool changer, 15,000 RPM, Turbo "MicroFine" elevated chip conveyor, oil cooler, OSP V-100M CNC control
(2001) OKUMA MDL. MC-V4020 VERTICAL MACHINING CENTER, Travels: X=40", Y=20", Z=17.72", 20" x 48" table, 1500# table load capacity, CAT 40-taper spindle, oil cooler, 8,000 RPM, 20 position automatic tool changer, wired for 4th axis, OSP V-100M CNC control
(2003) OKUMA MDL. MB-46VBE "ACE CENTER" VERTICAL MACHINING CENTER, Travels: X=30", Y=18.11", X=18.11", 18.11" x 29.92" slotted table, 1540# table load capacity, CAT 50-taper spindle, 32 position automatic tool changer, complete w/ coolant thru spindle, high pressure coolant, oil cooler, 6,000 RPM, Economoto elevated chip conveyor, OSP-E 100M CNC control
(3) (1997) OKUMA MDL. MX-45VAE VERTICAL MACHINING CENTERS, Travels: X=30", Y=18.11", Z=17.72", 18.11" x 29.92" table size, 500# capacity table load, NT 40-taper spindle, 20 position automatic tool changer, oil cooler, 7,000 RPM, OSPV700M CNC control
MATSUURA MDL. MC1000VS VERTICAL MACHINING CENTER w/ Yasnac control, 25 position automatic tool changer, BT 40 taper, 4th axis machine, 47" x 20" slotted table, Dakin oil cooler, hydraulics, Keller filtration system, Matsuura Yasnac CNC Controls
(1997) MATSUURA MDL. MC1000VG VERTICAL MACHINING CENTER, 21" x 45" table, 4th axis machine, 30 POS ATC, BT 45 taper, high pressure coolant, Yasnac CNC control
(2) (1997) MITSUI SEIKI MDL. VT3A CNC VERTICAL MACHINING CENTERS, 22-3/4" x 43" table size, 20,000 RPM, 40-position automatic tool changer, full 4th axis capability, 40-taper, Fanuc Series 16-M controls, chip conveyor
(2) MATSUURA MDL. MC-1000V5 CNC VERTICAL MACHINING CENTERS, 20" x 55" table size, travels: X=41", Y=20", Z=22", 50-taper, 20-3580 RPM spindle speeds, Fanuc 6M controls
ALSO: (2) (1997) 12.5" DIAMETER MITSUI SEIKI TYPE NCT3201 4TH AXIS ROTARY TABLES
CNC HORIZONTAL MACHINING CENTERS
(2000) OKUMA MDL. MX-40HA HORIZONTAL MACHINING CENTER, Travels: X=22.05", Y=24.02", Z=22.05", (2) 15.75" x 15.75" pallets, 1° indexing table, 2-pallet changer, BT 40 taper spindle, 7,000 RPM, coolant thru spindle, 30 position automatic tool changer, oil cooler, 7,000 RPM, Hennig elevated chip conveyor, OSP 7000M CNC control
(1996) MITSUBISHI MDL. M-H80D CNC HORIZONTAL MACHINING CENTER, Travels: X=48.15", Y= 39.250", (2) 30" square pallets, w/ 1/2° indexing, 46" clearance table to guard, Cat 50 taper spindle, 60-position automatic tool changer, transformer, 4-axis machine, Dakin oil cooler, hydraulics, coolant thru spindle, Mitsubishi CNC control
(1980) YASDA MDL. YBM-70W HORIZONTAL MACHINING CENTER, 30-position automatic tool changer, Fanuc 7M control, cat-50 taper spindle
(1984) BENDIX-TOYODA MDL. FHN50 II CNC HORIZONTAL MACHINING CENTER, w/ 4th axis, 28" x-axis, 20" pallets
YAM MDL. HSMC-650 HORIZONTAL MACHINING CENTER, 40-position tool changer, Cat 50 taper, 25" pallets, 40" pallet to door opening, dual pallet machine, Fanuc 6M CNC control
MAKINO HORIZONTAL MACHINING CENTER, w/ 18" x 18" built in rotary table, 30-position automatic tool changer, Cat 50 taper spindle, Fanuc 7M CNC controls
MAKINO HORIZONTAL MACHINING CENTER, w/ 18" x 18" rotary table, Fanuc 3000C CNC controls, 30-position automatic tool changer, Cat 50 taper spindle
(3) (1985/1985/1986) OKAMOTO MDL. HMC3000 CNC HORIZONTAL MACHINING CENTERS, 42" x 118" table size, travels: x-120" (table), y-60" (vertical), z-30" (column), 20-4000 RPM spindle speeds, 40-position automatic tool changer, Fanuc 11M CNC controls, 50-taper
(1984) OKAMOTO MDL. HMC3000 CNC HORIZONTAL MACHINING CENTER, 34" x 118" table size, travels: x-120" (table), y-60" (vertical), z-30" (column), 20-4000 RPM spindle speeds, 40-position automatic tool changer, Fanuc 6T CNC controls, 50-taper
MAKINO MDL. MC100 CNC HORIZONTAL MACHINING CENTER, (6) 30" x 30" pallets w/ pallet changer, approximately 50-position automatic tool changer, Fanuc 6M CNC control
CNCTURNING CENTERS
(1998) OKUMA MDL. 762S CROWN CNC TURNING CENTER, 21.65" swing over bed, 15.75" swing over cross slide, 10.62" turning dia., Z=20.47", X=7.28", 12 station turret, 10" 3-jaw chuck, hydraulic tailstock, OSP 7000L CNC control
(1998) OKUMA MDL. 762S "BIG BORE" CROWN CNC TURNING CENTER, 21.65" swing over bed, 15.75" swing over cross slide, 10.62" turning dia., Z=20.47", X=7.28" 3.15" spindle bore, 12 station turret, 10" 3-jaw chuck, hydraulic tailstock, OSP 700L control
OKUMA MDL. LC30-2ST 4-AXIS "SIMULTURN" CNC LATHE, w/ 12" diameter 3-jaw chuck, dual turrets, Okuma OSP5000L CNC controls
COORDINATE MEASURING MACHINE
(1997) BROWN & SHARPE EXCEL 0-15-9 COORDINATE MEASURING MACHINE w/ 86.5"L x 64"W x 94"H physical dimensions, PH10MQ probe, computer controlled, HP printer w/joystick control, PC2000 DMIS software DCC Version 3
CNC VERTICAL BORING MILL
(1982) O-M MDL. TM2-10N CNC VERTICAL BORING MILL, 6T Fanuc control, 39" table
VERTICAL BORING MILL
(1979) 49" TOSHIBA SHIBAURA MDL. TX-13 VERTICAL BORING MILL, 49" table, 5-station ram turret head, 30 HP spindle drive<
HORIZONTAL BORING MILL
UNIVERSAL HORIZONTAL BORING MILL, 3" spindle, 27" x 58" table, rotary type table
VERTICAL TURRET LATHES
56" BULLARD VERTICAL TURRET LATHE, w/ 70" max swing, (2) ram heads, side head, 32" cross travel each ram head, pendant controls, 3-axis digital readout, approximately 60" under rail
42" BULLARD "CUTMASTER" VERTICAL TURRET LATHE, 4-jaw chuck, 30 HP, 480 volt, 5-station turret, side head, 2-axis digital readout
34" BULLARD "SPIRAL DRIVE" VERTICAL TURRET LATHE, 34" 3-jaw chuck, 30 HP, fine feed, 550 volt
34" BULLARD "SPIRAL DRIVE" VERTICAL TURRET LATHE, 20 HP, fine feed, side head, 5-position turret
34" BULLARD "SPIRAL DRIVE" VERTICAL TURRET LATHE, 30 HP, fine feed, side head, 5-position turret, Itek Digiline 2-axis digital readout
LATHES (All Types)
LEBLOND MDL. 4025 HEAVY DUTY SLIDING BED LATHE, w/ 40" swing, approx. 65" thru gap, cc approx. 22ʼ w/ bed ext., 5-600 RPM spindle speeds, 3" hole thru spindle, 24" dia. 4-jaw chuck
18" X 60" AMERICAN LATHE, 32-1400 RPM Spindle speeds, 3-jaw chuck
HARDINGE MDL. HC CHUCKER LATHE, 6-station turret, draw bar, coolant, vari-speed carriage feed, spindle speeds: 125-3000 RPM
HARDINGE MDL. HC CHUCKER LATHE, 6-station turret, draw bar, vari-speed carriage feed, threading attachment, spindle speeds: 125-3000
OKUMA MDL. LS MANUAL GEARED HEAD TOOLROOM LATHE, w/ Heidenhain digital readout system, 21" x 80" 2" spindle bore, coolant
(3) OKUMA MDL. LS 21"X 60" GEARED HEAD TOOLROOM LATHES complete w/, In threading, thread dial, 12" 3-jaw chuck, 2" spindle bore, Pathfinder 2-axis digital readout, 35-1800 RPM
MONARCH MDL. 25N 31" X 72" GEARED HEAD LATHE, 6-303 RPM, in threading, micrometer stop, threading dial, 24" dia. 3-jaw chuck
LEBLOND "REGAL" TOOLROOM LATHE, 1-1/2" spindle bore, in/mm threading, threading dial
16" X 50" AMERICAN "PACEMAKER" LATHE, spindle speeds: 6-400 RPM, 2" spindle bore
MONARCH MDL. 10EE TOOLROOM LATHE
MILLS (All Types)
BRIDGEPORT SERIES II VERTICAL KNEE MILL, w/ dual 2-HP heads, 13-1/2" x 40, power feed slotted table, Dynapath Autocon Delta CNC controls
BRIDGEPORT SERIES II VERTICAL KNEE MILL, 60-4200 RPM, 9" x 42" slotted table
(7) BRIDGEPORT "SERIES J" VERTICAL KNEE MILLS w/, 9" x 42" table, some including 1.5-HP
ALLIANT VERTICAL KNEE MILL, 9" x 42" table, J-Head, 1.5 HP vari, Anilam Mini Wizard 2-axis digital readout
DOALL VERTICAL KNEE MILL, 9" x 42" table
CINCINNATI NO. 3 HORIZONTAL MILLING MACHINE, w/ 15-1/4"x 62-1/2" slotted table
CINCINNATI NO. 2L HORIZONTAL MILLING MACHINE, 10" x 53" slotted table
SAWS (All Types)
DO-ALL MDL. C12 HORIZONTAL BANDSAW
(1963) DO-ALL MDL. V36, 36" VERTICAL BANDSAW, w/ 30-1/2"x 30-1/2" tilting table, butt welder attachment
GRINDERS
ACER MDL. 618, 6" X 18" HAND FEED SURFACE GRINDER
COVEL 6" X 12" HAND FEED SURFACE GRINDER
COVEL 6" X 12" HAND FEED SURFACE GRINDER w/6" x 18" electromagnetic chuck,
NORTON 6" X 18" HAND FEED SURFACE GRINDER w/6" x 16" permanent magnetic chuck
EDM
ELOX SINKER TYPE EDM, Type A25S 6-KVA power supply, complete w/ Anilam Mini Wizard 2-axis digital readout
NC DRILLS
PRATT & WHITNEY TAPE-O MATIC NC TAPE DRILL, 30" x 20" table w/ D & D electronics Siemens control panel
PRATT & WHITNEY TAPE-O MATIC NC TAPE DRILL, 45" x 29" table w/ Decitek retrofit behind the tape NC control
PRATT & WHITNEY TAPE-O MATIC NC TAPE DRILL, 45" x 29-1/2" table w/ Decitek retrofit behind the tape NC control
PRATT & WHITNEY TAPE-O MATIC TRIAX 2640 NC DRILL
PRATT & WHITNEY MDL. "C" TAPE-O MATIC NC VERTICAL DRILL w/ 29" x 45" slotted table
PRATT & WHITNEY TAPE-O MATIC NC TAPE DRILL, 53" x 32" table w/ Decitek retrofit behind the tape NC control (not running)
INSPECTION
INCLUDING: Micrometers, Pin Gauge Sets, Vernier Calipers, Calipers, Gage Blocks, Thread Gauges, Deltronic Gauges, Etc.
MATERIAL
STEEL STOCK, CONSISTING OF: Aluminum Bar, Flats, Tube, Round Stock, Copper and Brass Rounds
AIR COMPRESSORS
(2010) KAESER AS-30 30 HP SIDE PACKAGED ENCLOSED SCREW TYPE AIR COMPRESSOR, Sigma control basic controls, steel vertical air storage tank, 125 PSIG, 10,541 hours
EMGLO 20 HP AIR COMPRESSOR, horizontal tank type
25HP GARDNER DENVER MDL. EBE99K31 AIR COMPRESSOR, w/ 125-PSI, Auto Sentry, S CONTROLS
ATLAS COPCO MDL. FD-45 AIR DRYER
AIR RECEIVING TANK
AIR DRYERS
(2) PNEUMATECH AD75 REFRIGERATED AIR DRYERS, 75 SCFM capacity
SEAM WELDER
SEAM WELDING UNIT, w/ approx. 80" vertical travel, (2) Airco spot welding guns, Miller power supply, P&W rotary table
MILLING MACHINE
FRITZ WERNER MDL. FV3 VERTICAL MILLING MACHINE, w/ 14" x 82" table size, 35.5-1800 RPM spindle speeds
BRIDGEPORT 1J VERTICAL MILLING MACHINE, w/ 9" x 36" table size, 80-2720 RPM spindle speeds
CINCINNATI HYDROMATIC MDL. 3-24 PRODUCTION MILL, w/ 12" x 50" table size
DRILLS
ARBOGA MASKINER TYPE RLM3508 3'9" RADIAL DRILL, w/ 70-1350 RPM spindle speeds
QUANTITY OF ASSORTED DRILL PRESSES
FORKLIFT TRUCKS
DATSUN MDL. CPF02 5300# PROPANE FORKLIFT TRUCK, w/ side shifter, solid tires
CLARK MDL. GPS25 4650# PROPANE FORKLIFT TRUCK, w/ side shifter, solid tires
MISCELLANEOUS MACHINERY
30" SCHERR-TUMICO OPTICAL COMPARATOR
2-DOOR GAS FIRED OVEN, ID: 72" wide x 96" deep, w/ Partlow chart recorder, meters & controls
KOCH ROMI-KON 300 OILY WASTE REDUCTION MACHINE
8" X 24" ABRASIVE NO. M3 HAND FEED SURFACE GRINDER, w/ 8" x 24" magnetic chuck
JOHNSON MDL. J HORIZONTAL BANDSAW
FLEX ARM RIVETING UNIT
ASSORTED DRILL PRESSES
HYDRAULIC ARBOR PRESS, w/ 42" between uprights
60" X 60" ACORN WELDING TABLE
8' X 16' X 14" THICK GRANITE SURFACE PLATE
20" TSUDAKOMA 4TH AXIS ROTARY TABLE
12" TSUDAKOMA 4TH AXIS ROTARY TABLE
24" ROTARY TABLE
25 TON MDL. B H-FRAME SHOP PRESS, 45" between uprights, hydraulic pump
ELECTRO ARC TAP DISINTEGRATOR
HYSTER 3-WHEEL LPG FORKLIFT TRUCK, hydraulic carriage, 2-stage mast, solid tires
TORIT MDL. 84 BAG TYPE DUST COLLECTOR
GREENARD NO. 4 ARBOR PRESS
FOX DOWNACTING POWER PRESS w/ 16-1/2" x 12" table
DAYTON 1 HP 10" DOUBLE END PEDESTAL GRINDER
BALDOR 1/4 HP 6" DOUBLE END PEDESTAL GRINDER
DAYTON 4T19SB 8" DOUBLE END BENCH GRINDER
DELTA 6" VERTICAL BELT SANDER
15" FLOOR TYPE DRILL PRESS
(4) POLLUTION FIGHTER MIST COLLECTORS
BUFFALO 2-SPINDLE DRILL PRESS
DELTA MDL. J 6" DOUBLE END PEDESTAL CARBIDE DRILL
GRINDER
POWERMATIC 6" DOUBLE END TOOL GRINDER, 1/2 HP
CINCINNATI 10" DOUBLE END PEDESTAL GRINDER, 1 HP
BALDOR 8" DOUBLE END PEDESTAL GRINDER, 1HP
BALDOR 2" VERTICAL BENCH GRINDER, 1.5 HP
PROSSER 6" DOUBLE END PEDESTAL CARBIDE TOOL GRINDER
DELTA 16" SPINDLE DRILL PRESS, 24 x 96" steel table
BLACK DIAMOND MDL. BW-90 DRILL SHARPENER, 1/3 HP
MISCELLANEOUS SHOP ITEMS, CONSISTING OF: Nikken Dividing Heads, Bridgeport Right Angle Attachments, Assorted Rotary Tables, 5C Collet Chuck, Large Quantity of 5-C Collets, Assorted Mill Vises, Angle Plates, V-Blocks, Presto 1000# Capacity Die Lift Carts, Shop Vacuums, Kurt 6" Milling Vises, Large Quantity of R-8 Collets, Flex-Arm & Wilton Articulating Tool Holders, Matsuura Tool Presetter, Lyon & Vidmar Tool Cabinets, Steel Strapping arts, Toledo 500# Capacity Bench Type Scale, 10ʼ Fiberglass Step Ladder, Perishable Tooling, Consisting Of: H.S. Drills, End Mills, Carbide Inserts, Insertable Tooling, Milling Cutters, Taps, Etc., Speedaire Portable Sand Blaster, Power America Mdl. 1422 Kerosene Fired Steam Power Washer, Hotsy Electric Fired Portable Steam Power Washer, Big Joe Boring Heads, Hydraulic Pallet Jacks, Susta Tool Storage Racks, Lista Tool Holder Storage Cabinets, Hout Drill Index Boxes, Big Joe Electric Lifts, Assorted Tool Presetters, Bott Tool Storage Cabinets, Hydraulic Pallet Jacks, Large Quantity of Holddowns, Assorted Size Chucks, Lathe Tooling, Chuck Jaws, "C" Clamps, Etc.
MISCELLANEOUS SHOP SUPPORT, INCLUDING: Vidmar Tool Cabinets, Kurt Milling Vises, Drills, Taps, Reamers, Milling Cutters, Fans, Hose, Work Benches & Vises, Holddowns, C-Clamps, Long Clamps, Angle Plates, 2-Wheel Hand Trucks, Pallet Jacks, Box Tables, Drill Presses, Double End Pedestal Grinders, Etc.
MORE THAN 1000 #40 & #50 TAPER TOOL HOLDERS
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
All Internet bidders must provide a WIRE TRANSFER DEPOSIT of approximately 25% of your planned spending amount or a $2,500 Minimum Deposit in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
| ONSITE BIDDERS |
|
Registration is available onsite. *** All onsite bidders must provide a $500 cash minimum registration deposit or 25% of approximate bid amount (whichever is greater) via wire transfer, cashier's check or company check accompanied by a bank letter of guarantee prior to the auction. PLEASE NOTE: Check must be guaranteed for 30 days *** PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
|
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
ONSITE: 15%
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
