TIMESAVERS Belt Sander • MAHROS Conveyor Belt • DMC Belt Sander S/N SA/005169 • ROCKWELL Drill Press • WEAVER Shaper • GRIZZLY Shaper • (9) GRIZZLY Shapers • GRIZZLY Shaper w/Power Feeder • SCMI Shaper w/ Power Feeder • (8) SCMI Shapers • TRIPLEX STANDARD Shaper • POWERMATICShaper with Power Feeder • ROCKWELL/DELTA Band Saw • (3) CTD Cut-Off Saws • JLT Rotary Door Clamp • ROCKWELL Table Saw • JLT Door & Frame Clamp • 2-Drum Dust Collector • MIKRON Multi Moulder & Router S/N MR6040 • OFFMANN Framing Shear • DELTA Drill Press • MIKRON Rosette • DELTA Band Saw • (2) POWERMATIC Table Saws • BRIDGEWOOD Horizontal Boring Machine • Edgesander • 2-Bag Dust Collector • TIMESAVERS Belt Sander • TIMESAVERS Planer/Sander • ROCKWELL Table Saw w/Power Feeder • SAC Sliding Table Saw • DELTA Radial Arm Saw • (2) DIEHL Straight Line Rip Saws • L & L MACHINERY Radio Frequency Gluer • 6-Shelf Door Clamp, Stationary • WHIRLWIND Chop Saw • LEADERMAC Moulder • POWERMATIC Planer • WEING Moulder • WEING Knife Grinder • WEING Opitcal Comparitor • PISTORIUS Toe Kick Chop Saw • J M LANCASTER Furniture Clamping Machine • SULLAIRE Rotary Screw Air Compressor • HANKISON Air Dryer • ERIDAE Refrigerated Air Dryer • COMP-AIR Rotary Screw Air Compressor • BALESTRINI Tenoner • BALESTRINI Mortiser • GRIGGIO Gang Rip Saw • (2) Dust Collectors • Assorted Lumber
For Removal Information Please Call Dale Bucy at Industrial Automation: 727-403-1521
BY ORDER OF U.S. BANKRUPTCY COURT, CASE # 11-40527 - REAL WOOD PRODUCTS CORP.
MOULDERS:
LEADERMAC Mdl. LMC 6280, Compact 623, 96 HP Total, 20-HP Largest, 230/460V, 3-Phase
(1998) WEINIG 6-Head , Mdl. UNIMAT 23E
(2005) MIKRON Radius Moulder Mdl. M652R, Var. Speed, Fwd./Rev. Cutter Head, PROSCALE Digital Height
WIDE BELT SANDERS:
TIMESAVERS Series 2300 3-Head, Mdl. 2331-24-001 - 1st Head @ 25 HP, 2nd Head @ 20 HP, 3rd Head @ 15 HP - Variable Speed, Digital Height Gage, Independent Micrometer Head Adjustment, 460V, 3-Phase
TIMESAVERS Series 2300 2-Head Wide Belt Sander, Mdl. 2321-24-01, 1st Head @ 25 HP, 2nd Head @ 20 HP, Micro Adjustable Height w/ Digital Readout, 460V, 3-Phase
ORBITAL SANDER:
(2005) DMC 2-Head, Mdl. 2000, Variable Speed, Elec. Height Adjustment, Roller Brush Head w/ Air Blow-off Unit, 460V, 3-Phase
PLANER/SANDER:
TIMESAVERS Series 2300 2-Head, Mdl. # 2321-23-21 - 1st Head @ 25 HP, Spiral Head w/ Insert Tooling & 2nd Head @ 20 HP, Contact Drum & Platten, Micro Adjustment Height w/ Digital Readout, 460V, 3-Phase
SAWS:
(2003) SAC Mdl. CS-4 Sliding Table Saw, 315MM Main Blade, 120MM Score Blade, 2800/4000/5600-RPM, Manual Tilting Table Saw w/ Independent Scoring Saw - 220V, 3-Phase
GRIGGIO Mdl. C530 Gang Rip, 14" Spindle, Motorized Height Control
(2) DIEHL Mdl. SL-55 Straight Line Rip Saw, 15 HP, 230V, 3-Phase (3) CTD Mdl. CTD-F255 R Chop Saw, Straight Cut-off 12" Blade, 3725 RPM, Programmable TIGER STOP Fence @ 120" Capacity, 208-230/460V, 3-Phase
PISTORIUS Mdl. MN/300 2-Head Miter Saw, 108" Fence Gage
ROUND END TENONER:
(2003) BALESTRINI PICO, 3.93" Max. Tenon Width, 1/18" Max. Tenon Thickness, 0 to 2" Max.Tenon Depth Range, 0 to 20-Deg. Table Tilt, Pneumatic Holddown Clamps on Each Table, Magnetic Controls w/ Overload Protection
SLOT MORTISER:
BALESTRINI Mdl. MICRON/2, 4.72" Max. Length of Stroke, 3.14" Max. Depth of Mortiser, 1.18" Max. Bit Dia., 0 to 20-Deg. Table Tilt, L. or R., (1) Pneumatic Holddown Clamp per Table
ROSETTE MAKER:
(2005) MIKRON Mdl. ROS200, 3 HP, 8000 RPM, 208-230/460V, 3-Phase
CLAMPS:
JLT Mdl. 79X-5-A 4-Position Rotary Door Clamp, 24.5" x 60" Cap.
(2001) JLT Mdl. 78B CDFC-M4 Cabinet Door & Frame Clamp, 54" x 96" Cap., 110/220V, 1-Phase
LANCASTER PNEUMATIC Furniture Clamp, 96" x 51" Cap., 110/220V, 1-Phase
JLT Lay-up Clamp
CONVEYOR:
MAHROS Belt Feed, 42" Feed Length, 57" Belt Width, Variable Speed, Adjustable Height
ROTORY SCREW COMPRESSOR:
(2003) SULLAIR Mdl. LS12V-50, 50 HP
DRYERS:
HANKINSON Desiccant Dryer
(2006) ERIDAE Mdl. YDCX-250NFE Refrigerated Dryer, 250CFM
FORKLIFT:
10,000 LB HYSTER – Rebuilt/Reconditioned in 2012 – Rebuilt Motor, Altenator, All Cylinders, New Wheels, Fresh Paint
LUMBER:
Approx. 4000 Sq. Ft. of a Variety of Raw Lumber
For Removal Information Please Call Dale Bucy at Industrial Automation: 727-403-1521
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
All Internet bidders must provide a WIRE TRANSFER DEPOSIT of approximately 25% of your planned spending amount or a $2,500 Minimum Deposit in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
| ONSITE BIDDERS |
|
Registration is available onsite. *** All onsite bidders must provide a $500 cash minimum registration deposit or 25% of approximate bid amount (whichever is greater) via wire transfer, cashier's check or company check accompanied by a bank letter of guarantee prior to the auction. PLEASE NOTE: Check must be guaranteed for 30 days *** PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
|
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
ONSITE: 15%
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
