1990 300-Ton x 60" x 42” Minster "HeviStamper" Straight Side Double Crank Eccentric Press • 1990 26" x 0.160" x 16,000 Lbs. Minster Servo Feed Line, Including: Minster Servo Feeder: Model MEF6-26 S/N 1850197, Minster Coil Straightener: Model 30-26-7 S/N 135010T & Minster Double End Coil Reel: Model 13-26D S/N 13-70118 • 220 Ton x 57" x 31" Aida Gap Frame Single Crank Press
(1990) 300 TON MINSTER HEVISTAMPER STRAIGHT SIDE DOUBLE CRANK VARI-SPEED PRESS & 16,000LB MINSTER SERVO FEED LINE & AIDA GAP FRAME 225-TON PRESS
1990 300-Ton x 60" x 42" Minster "HeviStamper" Straight Side Double Crank Eccentric Press
Model: E2-300, Serial #: 27301, Tonnage: 300, Ram Stroke: 8", Ram Adjustment: 6", Shut Height: 24.5", Bed Size (L-R, F-B): 60" x 42", Ram Size (L-R, F-B): 60" x 42", Strokes Per Minute (Variable): 0 - 120 , Opening In Bed: 54" x 28", Distance Between Gibbs Surfaces: 62", Distance Floor To Top Of Bed: 34", Window Size: 27", Dimensions (L x W x H): 121" x 93" x 17' 3", Weight: 87,000 Lbs. Equipped with: • Air Clutch & Brake • Tie Rod Construction • 8 Point Gibbing • Single Geared Twin Drive • Dual Counter Balance • Safety Light Curtains • Power Ram Adjustment • T Slotted Bed Bolster 8" Thick • Auto Lube System • Remote Control Cabinet • Remote Dual Palm Control Stand • Horsepower: 100 @ 1,800 RPM
1990 26" x 0.160" x 16,000 Lbs. Minster Servo Feed Line, Model: MEF6-26, Serial #: 1850197
• Minster Servo Feeder: Model MEF6-26 S/N 1850197, Capacity: 0.020" - 0.160", Capacity @ 26" Wide: 0.160", Capacity @ 5" Wide: 0.250", Max. Coil Width: 26", Feed Roll Diameter: 6.366", Line Speed: 80 - 800 IPM
• Minster Coil Straightener: Model 30-26-7 S/N 135010T, Capacity: 0.020" - 0.340", Max. Coil Width: 26", Diameter Of Straightening Rolls (7): 3", Diameter Of Pinch Rolls (4): 5", Line Speed: 1.200 IPM, Pneumatic Pinch Rolls, Remote Jog Hand Control
• Minster Double End Coil Reel: Model 13-26D S/N 13-70118, Coil Capacity: 16,000 Lbs., Max. Coil Width: 26", Coil Internal Diameter Range: 20" - 24", Max. Coil Outside Diameter: 72", Hydraulic Expansion, Coil Hold Down Bar, Coill Car
220 Ton x 57" x 31" Aida Gap Frame Single Crank Press
Model: PC-20 (2), Serial #: 0182, Tonnage: 220, Ram Stroke: 9.8", Ram Adjustment: 4.1", Shut Height: 17.7", Bed Size (L-R, F-B): 57" x 31", Ram Size (L-R, F-B): 33.4" x 24.8", Strokes Per Minute: 33, Opening Through Back: 35", Dimensions (L x W x H): 96" x 66" x 145", Weight: 50,000 Lbs., Equipped with: • Air Clutch & Brake • T-Slotted Bed Bolster & Ram • Power Ram Adjustment • Air Counter Balance • Auto Shot Lube System • Dual Palm Control • Stroke Position Indicator • Horsepower: 20
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| ONSITE & INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
DEPOSIT REQUIREMENTS FOR ONLINE BIDDERS: Minimum: $2,500 required which allows a spending limit of $10,000. If you are planning on spending above $10,000 you will need to deposit 25% of your maximum anticipated spending. (This will allow a spending limit up to 4 times the deposit amount sent) Example: $5,000 deposit = allows up to $20,000 You will only be allowed to bid up to 4 times your deposit amount so please estimate your deposit accurately. We will restrict any bidding beyond the above. Forms of payment for online deposits: 1. CASHIER'S CHECK made out to Biditup Auctions Worldwide and delivered to our office prior to the sale 2301 Belgrave Ave, Huntington Park, CA 90255 2. WIRE TRANSFER Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected]. We do not accept company checks or credit cards, NO EXCEPTIONS. |
|
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID |
| ALL DEPOSIT REFUNDS WILL BE RETURNED IN THE SAME METHOD OF DEPOSIT THAT WAS RECEIVED, WITHIN 5-7 BUSINESS DAYS. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
| All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER, ACH or Cashier's Check made out to BIDITUP AUCTIONS WORLDWIDE with a $2,500 MINIMUM DEPOSIT in order to be approved to bid. |
| Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected] |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
Auctioneer must approve all payment methods prior to bidding.
Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.
