(27) HYDRAULIC PRESSES UP TO 1000 TON:

• 1 Ton DENISON Multipress Hydraulic Press, Mdl. MDL. WUA, S/N N/A | Capacity: 1 Ton X 3"; Tonnage: 1; Stroke: 3" | LOCATED: SOUTH EL MONTE, CA
• 2003 7 Ton HS TECHNOLOGIES 4-Post Hydraulic Trim Press, Mdl. 4-02-322 | Capacity: 7 Ton; Stroke: 18 1/2” | LOCATED: PONTIAC, MI
• 8 Ton MULTIPRESS Hydraulic Press, Mdl. WR87M, S/N 31574 | Capacity: 8 Ton X 12"; Tonnage: 8; Stroke: 12" | LOCATED: SOUTH EL MONTE, CA
• 10 Ton HANNIFIN Hydraulic Press, Mdl. F-101-11, S/N D-8955 | Capacity: 10 Ton X 10"; Tonnage: 10; Stroke: 10" | LOCATED: SOUTH EL MONTE, CA
• 12 Ton DENISON “C” Frame Hydraulic Multipress, Mdl. WT127LC364FS1 90151D, S/N 27219 | Capacity: 12 Ton; Stroke: 12” | PONTIAC, MI
• 12 Ton DENISON Multipress Hydraulic Press, Mdl. M5P12, S/N N/A | Capacity: 12 Ton X 12"; Tonnage: 12; Stroke: 12" | LOCATED: SOUTH EL MONTE, CA
• 12 Ton DENISON Multipress Hydraulic Press, Mdl. M5P12, S/N N/A | Capacity: 12 Ton X 12"; Tonnage: 12; Stroke: 12" | SOUTH EL MONTE, CA
• 12 Ton Custom 4-Post Hydraulic Trim Press | Capacity: 12 Ton; Stroke: 18” | LOCATED: PONTIAC, MI
• 1997 20 Ton GREENERD Hydraulic Press, Mdl. HCA-20-73R3, S/N 97T5284 | Capacity 0020 Ton X 18"; Tonnage 20; Stroke 18" | LOCATION: SOUTH EL MONTE, CA
• 1997 20 Ton GREENERD Hydraulic Press, Mdl. HCA-20-73R3, S/N 97T5285 | Capacity: 0020 Ton X 18"; Tonnage: 20; Stroke: 18" | LOCATED: S. EL MONTE, CA
• 1996 20 Ton GREENERD Hydraulic Press, Mdl. HCA-20-13R3, S/N 96T5149-20 | Capacity: 20 Ton X 18"; Tonnage: 20; Stroke: 18" | LOCATED: SOUTH EL MONTE, CA
• 20 Ton DENISON Multipress Hydraulic 4 Post Press, Mdl. FH20, S/N 217168 | Capacity: 20 Ton X 12"; Tonnage: 20; Stroke: 12" | LOCATED: SOUTH EL MONTE, CA
• 28 Ton HANNIFIN Hydraulic 4 Post Press, Mdl. 4C28P, S/N 50941 | Capacity: 0028 Ton X 10"; Tonnage: 28; Stroke: 10" | LOCATED: SOUTH EL MONTE, CA
• 30 Ton KARD Hydraulic 4 Post Press (Down Acting), Mdl. TP- 30- 4, S/N R1509-1 | Capacity: 30 Ton X 16"; Tonnage: 30; Stroke: 16" | LOCATED: SOUTH EL MONTE, CA
• 40 Ton HANNIFIN Hydraulic Press | Capacity 40 Ton X 27” & 24 TN X 27”; Capacity (Tons) 40 @ 5000 PSI, 24 @ 3000 PSI; Stroke 27” | LOCATION: LOS ANGELES, CA
• 50 Ton DENISON Multipress Hydraulic Press, Mdl. FN 50, S/N N/A | Capacity: 0050 Ton X 15"; Tonnage: 50; Stroke: 15" | LOCATED: SOUTH EL MONTE, CA
• 75 Ton IMPERIAL Hydraulic Hobbing Press, S/N N/A | Capacity: 75 Ton; Stroke: 12"; Shut Height: 12"; Bed Area: 24" LR X 21" FB | LOCATION: TOLEDO, OH
• 1996 96 Ton VREMAC Double Action Hydraulic Press, Mdl. 100 FS, S/N 964284 | Capacity: 96 Ton; Bed & Slide: 50" X 60.2"; Tonnage Upper Cylinder: 96; Stroke Upper Cylinder: 17.7"; Tonnage Lower Cylinder: 33.7; Stroke Lower Cylinder: 5.9"; Tonnage Ejector Cylinder: 33.7; Stroke Ejector Cylinder: 1.38" | LOCATED: PONTIAC, MI
• 1996 100 Ton PACIFIC 4-Post Hydraulic Press, Mdl. 100CX, S/N A-1294 | Capacity: 100 Ton; Stroke: 32” | LOCATED: PONTIAC, MI
• 1999 100 Ton SUTHERLAND DEES 4-Post Hydraulic Down Acting Press, Mdl. HP-100, S/N 24053 | Capacity: 100 Ton X 20"; Tonnage: 100; Ram Stroke: 20" | LOCATED: S. EL MONTE, CA
• 110 Ton WATERBURY-FARREL Hydraulic Press, Mdl. 70S, S/N 240556-1-240576 | Capacity: 110 Ton; Stroke: 6"; Bed Area (L-R X F-B): 25-7/8" X 22" | LOCATED: TOLEDO, OH
• 1991 150 Ton TETRAHEDRON 4 Post Air Hydraulic Press (Up Acting), Mdl. MTP24, S/N 24017023 | Capacity: 150 Ton X 12"; Tonnage: 150; Ram Stroke: 12" | LOCATED: SOUTH EL MONTE, CA
• 150 Ton PACIFIC Press Former II Hydraulic Press, Mdl. 150 PF II, S/N 9372, MFG 1984 | Capacity: 150 Ton X 12"; Tonnage: 150; Ram Stroke: 12" | LOCATED: S. EL MONTE, CA
• 1984 150 Ton DAKE Hydraulic 4-Post Press (Downacting), Mdl. 927-824, S/N 183006 | Capacity: 0150 Ton X 27"; Tonnage: 150; Upstroke Tonnage: 65; Ram Stroke: 27" | LOCATED: FORT WORTH, TX
• 150 Ton DAKE Hydraulic Traveling H-Frame Straighting Press | Capacity: 150 Ton X 13"; Tonnage: 150; Ram Stroke: 13" | LOCATED IN: GRANITE FALLS, WA
• 1976 400 Ton WILLIAMS & WHITE Down Acting Hydraulic Press, Mdl. SH400-144-60, S/N C-4192 | Pressing Capacity: 400 Ton; Stripping Capacity: 120 Ton; Lifting Capacity @ Rapid Return Speed: 15 Ton; Bed: 60” X 144”; Ram: 60” X 144”; Stroke: 33” | LOCATED: PONTIAC, MI

• 1985 1000 Ton WILLIAMS & WHITE Down Acting Hydraulic Press, Mdl. SH-1000-96-60, S/N C-4533 | Stroke: 72"; Daylight: 84"; Bed: 60" x 96"; Ram: 60" x 96"; Pressing Capacity: 1000 ton; Intermediate pressing capacity: 250 ton; Stripping capacity: 300 ton; Lifting capacity @ fast open: 20 ton; Speeds: 1000 IPM/fast close, 20-175 IPM/intermediate, 5-100 IPM/full pressing, 20-170 IPM/strip, 850 IPM/fast open; Maximum working pressure: 2937 PSI; Motor & P/C console controls: 400 HP | Equipped with: Housing type with tie rods; Welded steel construction; 8-Point gibbing; Oilgear pump Model #PVL-320 | LOCATED: STERLING HEIGHTS, MI

(8) KNUCKLE JOINT PRESSES:

• 600 Ton BLISS Knuckle Joint Press, Mdl. 25-A, S/N 34931 | Capacity: 600 Ton; Strokes Per Minute: 42; Stroke: 3 1/2"; Slide: 19" X 26"; Bed: 36" X 34"; Shut Height: 1/2" To Bed | LOCATED: PONTIAC, MI
• 600 Ton MINSTER Knuckle Joint Press, Mdl. 90-600, S/N 90-600-12141 | Capacity: 600 Ton; Stroke: 6"; Strokes Per Minute: 33; Bed: 32" X 24"; Slide: 16" X 18"; Shut Height: 19" To Bed | Located in: Toledo, OH
• 600 Ton BLISS Double Crank Knuckle Joint Press, Mdl. 25-S, S/N T-35473 | Capacity: 600 Ton; Stroke: 10"; Strokes Per Minute: 22; Bed: 36" X 54"; Slide (T-Slotted): 28" X 48"; Shut Height: 36" To Bed | LOCATED: PONTIAC, MI
• 800 Ton CLEVELAND Knuckle Joint Press, Mdl. 8K, S/N 9745-1 | Capacity: 800 Ton; Stroke: 14”; Strokes Per Minute: 14; Bed: 36” X 47”; Ram: 32” X 38”; Shut Height: 26 1/2” To Bed | LOCATED: PONTIAC, MI
• 800 Ton BLISS CMC Knuckle Joint Press, Mdl. 26 A, S/N H-9077-2 | Capacity: 800 Ton; Stroke Per Minute: 33; Stroke: 10"; Bed: 38" X 40"; Slide: 28" X 33 1/2"; Shut Height: 24" To Bed | LOCATED: PONTIAC, MI
• 800 Ton BLISS Knuckle Joint Press, Mdl. 665, S/N T-34858 | Capacity: 800 Ton; Stroke: 5"; Strokes Per Minute: 33; Bed: 32" X 28"; Slide: 16" X 20 1/2"; Shut Height: 20" To Bed | LOCATED: PONTIAC, MI
• 1000 Ton BLISS-TOLEDO Knuckle Joint Press, Mdl. 666, S/N 29573 | Capacity: 1000 Ton; Stroke: 5"; Strokes Per Minute: 30; Bed: 37" X 31"; Shut Height: 18" To Bed | LOCATED: BROOKVILLE, OH
• 1200 Ton BLISS Knuckle Joint Press, Mdl. 28, S/N 48659 | Capacity: 1200 Ton; Stroke: 6"; Strokes Per Minute: 22; Bed: 47" X 37"; Slide (T-Slotted): 26" X 28"; Shut Height: 32" To Bed | LOCATED: BROOKVILLE, OH

(2) SSSC PUNCH PRESSES:

• 500 Ton MINSTER Straight Side Single Crank Punch Press; MDL. S1-500-42-54, S/N 8401 | Capacity 500 Ton; Stroke 14"; Strokes Per Minute 20; Bed 54" X 42"; Slide (T-Slotted) 54" X 42"; Shut Height 43" To Bed | LOCATED: RIVERBANK, CA
• 1000 Ton CLEARING Straight Side Single Crank Punch Press, Mdl. F1-1000-48, S/N 52-17408-P | Capacity: 1000 Ton; Stroke: 14"; Strokes Per Minute: 20; Bed: 48" X 48"; Slide: 48" X 48"; Shut Height: 46" To Bed | LOCATED: RIVERBANK, CA 

(1) 220 TON KOMATSU SSDC TRANSFER PRESS, MDL. E2P-200:

• 1984 220 Ton KOMATSU Straight Side Double Crank Transfer Press, Mdl. E2P-200, S/N 10013 | Capacity: 220 Ton; Stroke: 15.75”; Strokes Per Minute: 17 – 35 Variable | LOCATION: SOUTH EL MONTE, CA

PUNCH PRESS ACCESSORIES:

(3) STRAIGHTENERS:

• 12” LITTELL Straightener/Feeder, MDL. 412-HVS-7PD, S/N 76363-68 | CAPACITY 12” X .125” | EQUIPPED WITH: (7) STRAIGHTENING ROLLS, ENTRY PINCH ROLLS | LOCATION: PONTIAC, MI
• 10,000 LB FEEDLEASE  Reel - Straightener, MDL. FLR-10M-30, S/N 3947 | WIDE 30"; I.D.  20" - 24"; O.D.  72" | EQUIPPED WITH: HYDRAULIC EXPANSION, DRIVEN REEL, AIR CLUTCH & BRAKE, TRAVELING COIL CAR, HOLD DOWN ARM, 3 KEEPERS
• 1993 FEEDLEASE - Straightener, MDL. FLPS-2 1/4-30-11, S/N 3871 | 11 STRAIGHTENING ROLLS 2 1/4" DIA; CAPACITY .060" X 30" - .080" X 24" - .100" X 18"; MINIMUM CAPACITY .020" X 30"; SPEED 12 - 60 FPM | EQUIPPED WITH: BACK-UP ROLLS, ROLL SENSORS W/LED READOUTS, ENTRY & EXIT PINCH ROLLS WITH AIR LIFT | LOCATION: PONTIAC, MI

 

(5) FEEDS:

• 12” COE Servo Feed, MDL. CPRF-312, S/N 2297-1 | MAX MATERIAL THICKNESS .156"; MAX SPEED 300’ PER MIN | LOCATION: RIVERBANK, CA
• 24” COOPER - WEYMOUTH Servo Feed, MDL. SMX-24H, S/N 35004, MFG 1994 | CAPACITY 24" WIDE X .187" THICK, WIDTH 24"; THICKNESS .187"; FEED LENGTH 0" - 999.999" | EQUIPPED WITH: CABINET MOUNT, SERVOMAX CONTROL, AIR OPERATED PILOT RELEASE, TRABON MODUFLO PUMP PACKAGE | LOCATION: PONTIAC, MI
• 1999 DALLAS - Air Feed, MDL. D-250, S/N 20089| CAPACITY 36” X .020”; STROKE 36”; BORE CYLINDER 2 ½” | EQUIPPED WITH: 5 ROLL PULL THRU STRAIGHTENER, BASE | LOCATION: PONTIAC, MI
• ROWE - Servo Feeder, MDL. FDC- 053- 440SS, S/N 24298 | CAPACITY 40" X 0.080"; WIDTH 40" MAX; THICKNESS 0.020" - 0.080"; NUMBER OF ROLLS 6; ROLL DIAMETER 3.820"; FEED RATE 300 FPM; DIMENSIONS (L X D X H) 120" X 64" X 58"; WEIGHT 4,000 LBS; MOTOR 5 HP | EQUIPPED WITH: AIR PINCH ROLLS, REMOTE HAND JOG, ENTRANCE CANTILEVER, REXROTH INDRAMAT SYSTEM 200 REMOTE DIGITAL CONTROL | LOCATION: SOUTH EL MONTE, CA
• DALLAS - Air Feed, MDL. D400 DOUBLE | CAPACITY 42" X .170"; STROKE 30"; BORE CYLINDERS 4" | EQUIPPED WITH: 5 ROLL PULL THRU STRAIGHTENER, POWERED ENTRY PINCH ROLLS - AIR LIFT, CABINET BASE WITH ADJUSTABLE LEG HEIGHT | LOCATION: PONTIAC, MI

 

(12) REELS:

• 4000 LB X 8” PERFECTO Reel, MDL. 12-M-SB, S/N PR-3950 | O.D. 48”; I.D. 15 ½” – 20 ½”; WIDTH 12” | EQUIPPED WITH: (3) KEEPERS, ELECTRIC BRAKE | LOCATION: PONTIAC, MI
• 4000 LB MINSTER Coil Reel, MDL. MR4-14S, S/N 13-70216 | I.D. 16” – 20”; O.D. 60”; WIDE 14” | EQUIPPED WITH: PNEUMATIC DRAG BRAKE, (2) KEEPERS | LOCATION: PONTIAC, MI
• 4000 LB ASL Reel, MDL. 60, S/N 6558 | I.D. 16" - 20"; O.D. 60"; WIDTH 24" | EQUIPPED WITH: MOTORIZED, VARI-SPEED, 3 KEEPERS | PONTIAC, MI
• 4000 LB RAPID Air Reel, MDL. RA4012, S/N 113464 | I.D. 16" - 24"; O.D. 72"; WIDTH 12" | EQUIPPED WITH: MOTORIZED, VARI-SPEED, 5 KEEPERS | PONTIAC, MI
• 6000 LB JACO Reel, MDL. JVRE6024-02, S/N 39611476, MFG 1996 | I.D. 16" - 20"; O.D.  60"; WIDTH 24" | EQUIPPED WITH: ELECTRIC BRAKE, PNEUMATIC HOLD DOWN ARM, (2) KEEPERS | LOCATION: PONTIAC, MI
• 6000 LB DALLAS Reel, MDL. DPR624, S/N 17652 | I.D. 16" - 20"; O.D. 60"; WIDTH 24" | EQUIPPED WITH: MOTORIZED, VARI-SPEED, 4 KEEPERS | PONTIAC, MI
• 6000 LB JACO Reel, MDL. JVRE6032, S/N 39611479, MFG 1996 | I.D. 16" - 20"; O.D. 60"; WIDTH 32” | EQUIPPED WITH: ELECTRIC BRAKE, PNEUMATIC HOLD DOWN ARM, (2) KEEPERS | LOCATION: PONTIAC, MI
• 7000 LB PERFECTO Double End Coil Reel, MDL. RD6-1813, S/N 76790 | I.D. 19.5” – 24.5”; O.D. 60”; WIDE 18” | EQUIPPED WITH: JOG DRIVE, FULL BACKING PLATE, HYDRAULIC EXPANSION | NOTE: THERE IS NO HYDRAULIC UNIT OR ELECTRICS | LOCATION: PONTIAC, MI

• 10,000 LB DAHLSTROM Uncoiler | EXPANSION 20” – 24”; MANDREL 32” | EQUIPPED WITH: HYDRAULICALLY OPERATED COIL CAR, COMBINATION MOTORIZED HYDRAULIC EXPANSION | LOCATION: HOLLAND, OH

• 30,000 LB AMERICAN STEEL Line Uncoiler, MDL. 1000 | I.D. 19” – 24”; O.D. 72” FULL BACKING PLATE; WIDTH 60” WIDE | EQUIPPED WITH:MOTORIZED, HYDRAULIC, EXPANSION, HOLD DOWN ARM, AIR CLUTCH & BRAKE, TRAVELING REEL, STATIONARY COIL UPENDER & LIFT | LOCATION: PONTIAC, MI
• 30,000 LB AMERICAN STEEL Line Uncoiler; MDL. 1000, S/N 2917 | I.D. 19” – 24”, (24” – 29” W/ SPACERS); O.D. 60”; WIDTH 54”; THREADING TABLE 60” WIDE | EQUIPPED WITH:MOTORIZED, (2) KEEPERS, BACKING PLATE, TRAVELING REEL, HOLD DOWN ARM, AIR CLUTCH & BRAKE, HYDRAULIC EXPANSION, STATIONARY COIL UPENDER & LIFT | LOCATION: PONTIAC, MI

• 40,000# ROWE REEL WITH TRAVELING COIL CAR, MDL. #40060 DSJ, S/N 22875 | 60" WIDE; 19" - 24.5" I.D.

  60" O.D. | DRIVEN SPINDLE JOG DRIVE, ADJUSTABLE AIR BRAKE, HOLD DOWN ARM, STOCK DEFLECTOR, FOB TRUCK | LOCATION: ATHENS, TN

(5) CRADLES:

• TURNTABLE Wire Payoff | COIL CAPACITY 2,200# EST.; COIL O.D. 48"; COIL I.D. 20"; CENTER HUB 24" H; CENTER HUB DIA 20"; OVERALL SIZE 48" X 48-1/2" X 36" H; WEIGHT 400# EST | EQUIPPED WITH: FLOOR TYPE | LOCATION: TOLEDO, OH
• TURNTABLE Wire Payoff | COIL CAPACITY 2,200 LB ESTIMATED; COIL O.D. 50"; MIN COIL I.D. 19"; CENTER HUB 20" H; OVERALL SIZE 50" DIA x 26" H; WEIGHT 300 LB ESTIMATED | EQUIPPED WITH: FLOOR TYPE | LOCATION: TOLEDO, OH
• 10,000 LB DALLAS Coil Cradle - Straightener, MDL. 40591, S/N 12009 | WIDE 24"; O.D. 60"; STRAIGHTENING CAPACITY .300" X 24"; MIN. CAPACITY .080" X 24"; 5 STRAIGHTENING ROLLS 3 1/2" DIA.; ENTRY & EXIT PINCH ROLLS 5 1/2" DIA. | EQUIPPED WITH: MOTOR, AIR CLUTCH & BRAKE. STOCK DEFLECTOR, PNEUMATIC FLIP OPEN CHUTE | LOCATION: PONTIAC, MI
• 10,000 LB COE Coil Combination Cradle & Power Straightener, MDL. CPCC-10012, S/N 2297-2 | ROLL DIAMETER 3-1/2"; NUMBER OF ROLLS 7; COIL WIDTH 12"; MAX COIL O.D. 60"; SHEET THICKNESS .125 @ 12"; PAY OFF RATE 120’ PER MIN | LOCATION: RIVERBANK, CA

WHEELABRATOR:

• 72" AMERICAN Wheelabrator Double-Sided Blast Plate Cleaning Machine, Mdl. 70490, S/N A94217 | Maximum Width 72”, Blast & Clean Rate 12’ – 30’ Per Min, Entry Power Roller Conveyor 16’, Exit Power Roller Conveyor 16’, Shot Wheels – Top 5 - 20 Hp, Shot Wheels-Bottom.. 3 – 20 Hp | Equipped With: Infeed Conveyor Air 4-Station Air Suction Gripper, Transfer Conveyor, Exit Conveyor, Exit 4-Station Air Gripper, Dust Collector, Central Cabinet, Electrical Cabinet | LOCATION: RIVERBANK, CA

Bidders Must Agree to All Terms & Conditions.

PROXY BIDDERS:
If you would like to bid, but are unable to participate in our online auction, please fill out, sign and fax back the BIDITUP Terms and Conditions contract.

A 25% deposit of your total maximum bid(s) will need to be submitted to BIDITUP Auctions Worldwide, Inc. for your proxy bid approval.

If you are using a credit card for your deposit, please fill out, sign and fax the credit card authorization form to our office with the 25% amount of your desired credit limit in the ‘Amount’ box.  See other methods below.

ONLINE BIDDERS:
US and Canadian bidders do NOT need to submit a deposit to bid.

Buyer’s Premium: A 18% Buyer’s Premium Will Be Charged At This Sale.

Acceptable Payment Methods:
1. Cash
2. Cashier’s Check
3. Wire Transfer
3. Corporate check*
4. Personal and company checks*

*Acceptable at the Auctioneer’s sole discretion. Must be accompanied with a bank letter of guarantee from company’s bank guaranteeing unqualified payment to Auctioneer.

Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.

PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS! The credit card authorization form is provided only for proxy bidders and online bidders who need to submit deposits.

Download and complete the appropriate form for Bidder Authorization. Once complete, fax it to 818.508.3025.

Credit Card Authorization Bank Letter of Guarantee Terms & Conditions Wire Transfer  Please contact BIDITUP office for wire transfer info.